The Flashni combines audible and visual warning into the one unit.
Clear installation instructions are provided and there is easy to access terminals or select switches. Flashni can output two out of 28 different tones by using a switching voltage to the appropriate terminals.
The installer can run either 2 wires for a single tone output or run a 3rd wire to switch the 2nd tone. The sounder is designed to have an output of 101 dBA at 1 metre with a current consumption of only 68 mA.
The strobe will flash at a rate of approximately 60 times per minute.
Dimensions (mm): 93 x 92 D (shallow base) 93 x 121 D (deep base)