The Leak Detection 1 MkII is a self-contained single zone leak detection module specially designed for incorporation into other control/alarm systems, air conditioning units and BMS (Building Management Systems) etc.
The module can be used with all Westminster Flood Detection Systems range of sensors.
The compact module is din-rail mounted and screw terminals provide connections for the leak sensors, power input and volt-free contact output.
| Function: | Water/liquid detection |
|---|
| Zone Capacity: | 1 Zone |
|---|
| Power: | Multi-Voltage 12 or 24v, AC or DC |
|---|
| Construction: | Housed within a polycarbonate enclosure |
|---|
| Dimensions: | Length 100mm, width 75mm, depth 22.5mm |
|---|
| Fixing: | Din-rail mounted |
|---|
| Monitoring: | LEAK- continuous water/liquid
SYSTEM FAULT - sensor or leader cable damage, failure or disconnection |
|---|
| Alarm Indicators: | Flashing LEDs for LEAK or SYSTEM FAULT
All alarms displayed separately and continuously until corrected and reset if in manual mode. |
|---|
| Status Indicators: | Power; Control; Auto/Manual Reset |
|---|
| Outputs: | Leak - system fault SPCO Relay 1Amp@24vdc |
|---|