The WG 602 is a fully stainless-steel, motorised, half-height, bi-directional turnstile with automatic drop and rising arms, designed to control access in a variety of locations; such as, airports, commercial buildings, courthouses, embassies, government buildings, etc.
WG 602 Specifications
- Power Supply: 220v. 50 Hz. at standby ~11W. Max. ~60W;
- Arms: Single-sided Ø40mm x 2.5mm anodised hard mat aluminium (Opt. Stainless steel). Can be dismantled or mounted one by one separately;
- Dimensions: 450x1000x300 + arm length (470mm);
- Weight: ~36kgs;
- Body Features: 2 mm 304 stainless steel (SS) or electrostatically powder coated on DKP iron sheet metal. Both alternatives are protected against water for external utilisation;
- Working temperature: -10°C/+45°C (Ops. -50°C with heater unit);
- Control System: Can be controlled through dry contact or any tension in between TTL. CMOS. 5-48v. Can be operated harmoniously with all kinds of access control units and token system when integrated. The functions can be controlled via RS 232, RS 485 or LAN network;
- Flow Rate: Number of Persons / minute Min.12 - Max.30 (Please note that the above given figures are approximate for one person per walkway or lane. Utilisation of different access control units can change the figures between minimum and maximum rates);
- Indicators: Direction and top pass indicators are built-in property.
The WG 602D is a double flow turnstile, based on the WG 602. It is ideal for locations where faster access is required for a greater number of people.
WG 602D Specifications
- Power Supply: 220 v. 50 Hz. at standby ~22W. Max. ~120W;
- Arms: Double-sided Ø40mm x 2.5mm anodised hard mat aluminium (Opt. Stainless steel). Can be dismantled or mounted one by one separately;
- Dimensions: 450x1000x600 + arm length (2x470mm);
- Weight : ~56 kg;
- Body Features: 2 mm 304 stainless steel (SS) or electrostatically powder coated on DKP iron sheet metal. Both alternatives are protected against water for external utilisation;
- Working Temperature: -10°C/+45°C (Ops. -50°C with heater unit);
- Control System: Can be controlled through dry contact or any tension in between TTL. CMOS. 5-48v. Can be operated harmoniously with all kinds of access control units and token system when integrated. The functions can be controlled via RS 232, RS 485 or LAN network;
- Flow Rate: Number of Persons / minute Min.12 - Max.30 (Per lane) (Please note that the above given figures are approximate for one person per walkway or lane. Utilisation of different access control units can change the figures between minimum and maximum rates);
- Indicators: Direction and top pass indicators are built-in property.