This is an ultra-high sensitive ground scanner, designed specifically for grid searches and scenes of crime applications.
Key features
- Ultra high sensitivity to very small and large targets;
- Specifically designed for grid searches and S.O.C. investigations;
- Audio/Visual and silent vibrating alarm;
- Ultra light weight construction 1kg including battery;
- Simple to use press the "on" button and start searching.
Specifications
Construction: Polycarbonate, aluminium and ABS. Ultra strong and light construction.
Dimensions:
- Diameter: 21cm (8 inches);
- Height: 91cm handle to floor (short mode) 142cm fully extended;
- Weight: 1.5kg including battery;
- Fully adjustable sensitivity;
- Target size better than 0.05 grams;
- Operating Temp: -20C to +65C;
- Storage Temp: -30C to +80C;
- Humidity: 98%;
- Ingress Protection: IP64 Control panel, Probe Subnersible;
- Pwer: 9 Volt alkaline (MN1604, 6LR61 or equivalent disposable;
- Power Consumption: Standby Current: Nil, Active Mode Current (No Detection): Less than 1mA, Alarm Mode (Metal Detected): 6.5mA (audio/visual mode);
- Battery Management: Yellow LED low power, Continuous Red and Yellow LED expired battery;
- Battery life: 9-Volt battery up to 360 Hrs, continuous use in audio/visual mode. Standard Alkaline, 100 Hrs NiCad Rechargeable;
- Vibration mode will run battery down faster than Audio/Visual mode;
- Alarm indicated in two modes with 2-way rocker switch (a) Audio Visual (beeper and red LED) (b) Vibration only (tactile vibration from the handle of the detector to the hand of operator. Detector only beeps when metal is present.
- Detection Speed: Ultra fast Detect Alarm and Reset ready for another target - 0.1 second;
- Size of target indication: At constant sweep speed: short alarm = small target / long alarm = larger target;
- Controls: On/Off rocker switch (green flashing LED indicates ON mode)
- (b) Red LED indicates alarm mode.
- (c) Yellow LED indicates battery power is low and need charging or recharging.
- (d) Two way switch changing between A/V (audio/visual) and VIB (vibration mode).
- (e) Miniature sensitivity adjustment knob.
- Target Types: Detects all metals including alloys, with instant response to all metals;
- Testing: Tested and approved to EEC EN5800-1 Table 1. EN50082-1 Table 1:1.1 Radiated emissions (CE marked).
- (b) Conforms to international standards IEC, NILEC, FCC, and FAA.
- (c) Medically tested - No risk to persons with pacemakers.
- (d) Non-interference with magnetic recorded material.