The ER3000 has been specifically designed for the detection and location of tiny foreign metal objects that have been concealed or ingested deep within the skin tissue or body cavities.
This technological advance has established a new level of performance for super high sensitivity metal detection, giving the user the ability to detect objects that were previously impossible to detect with a standard hand held metal detector.
ER3000 has the ability to detect metal fragments that are concealed or buried deep within the skin tissue, making the ER3000 a major step forward in the detection of weapons and contraband concealed within the body cavities.
Ultra Series Features
- Ultra Low Battery Consumption - Nil Standby: Less than 1mA Operating: 6.5mA Alarming;
- Ultra High Speed -Alarm and reset ready for a new target in 0.1 seconds;
- Ultra High Definition and Sensitivity - Precision accuracy in locating even extremely small masses of all metals: 0.03 g (or better);
- Battery Management System - This system constantly monitors the detector's power source. A flat or defective battery is indicated by means of a yellow L.E.D.;
- Warranty - 3 Years parts and labour.
Ultra Series Specifications
- Dimensions: Length: 360mm. Width: 105mm (probe). Body 55mm. H35mm;
- Weight: Weight: 290grms (AD2300); 295grms (AD2500); 300grms (AD2600S) including battery;
- Sensitivity: Target Size better than 0.03grms;
- Operating Temperature: -200 to +650;
- Storage Temperature: -300 to +800;
- Humidity: 98%;
- Ingress Protection: IP64 (IEC 529) (Waterproofing & environmental protection);
- Power Consumption: Standby Current: Nil;
- Active Mode Current (No detection): Less than 1mA;
- Alarm Mode Current (metal detected): 6.5mA;
- Operating Time: 360 hours continuous at +25C (alkaline battery); 100 hours continuous at +25C (rechargeable battery single charge);
- Battery: 9 Volt block battery MN1604, 6LR61 or equivalent alkaline disposable or rechargeable.
- Tested and approved to EEC ENS008-1 Table 1. EN50082-1 Table 1:1.1 Radiated emissions;
- Conforms to international standards IEC, NILEC of FCC, FAA;
- Medically tested and approved - No risk to persons with pacemakers;
- Non interference to magnetic recorded material.
Full Battery Management System - Precision monitoring.
Low voltage is signalled in two stages: Yellow LED lights warning the user that the battery will need replacing or recharging in the near future. When the battery is exhausted a continuous audio and Red + Yellow visual alarm signal is produced.
- Alarm indication by means of piezo audio alarm and High intensity L.E.D.;
- Speed of detection: Ultra fast; `Detect - alarm - reset' ready for another target - 0.1 second;
- Size of target indication: At constant sweep speed: short digital pulse = small target. Long pulse = large target;
- Battery inserted "cartridge" style - no wires or connectors for greater reliability. No false alarms;
- Minimum pressure push-button switch operation. minimum life 10,000,000 operations;
- Instant response to all metals.