The WG 970 Security Bollard is a hostile vehicle mitigation solution designed to withstand direct impact forces in excess of 1,800 KJ, the bollard provides protection from extreme Vehicle Borne Improvised Explosive Device attack to sites where aesthetics and public perception are a consideration.it is able to protect sites from extreme aggressive attacks while maintaining a less aggressive appearance.
It is electro-hydraulically operated, with a 1,000 mm height when fully raised.
Raised and Lowered back indication signalling can be provided to enable remote monitoring of the bollard status on a real time basis (optional).
The hydraulic power pack is controlled by a programmable logic controller (PLC) the HPU can provide outputs for a number of bollards for simultaneous operation, in the event of power failure a manual pump is provided to ensure operator control is maintained.
Each bollard system is provided with a push-button control as standard, however, it can be customised to interface with a wide range of access control equipment to suit specific customer requirements. Available configurations include (but are not limited to) inductive loop systems card readers, communication equipment and manned guard emergency systems can be accommodated.
For safety reasons pedestrians, cyclists and motorcycles are advised not to use a bollard controlled roadway, additional safety measures can be incorporated into the bollard system if required. Where the bollard control point is remote from the installation, we strongly recommend the fitting of a recordable CCTV system, traffic lights and safety inductive loop systems.