WG HF Tracking Device

Westminster International LtdProductsSecuritySurveillanceWG HF Tracking Device

WG HF Tracking Device

Westminster Code: 11885

The WG HF Tracking Device is a vehicle or motorcycle tracking system which complies with the Automotive industry standards.

Easy to install in a vehicle or motorcycle, it is compact in size and includes built in antennas.

Description

The WG HF Tracking Device is a vehicle or motorcycle tracking system which complies with the Automotive industry standards.

It can customised to alert any type and combination of events, for example you can define a request to change the broadcasting frequency automatically once the car enters a specific area and the door is opened.

Maintains stability due to its state of the art OTA (over the air) ability to remotely upgrade with new features and ability to change settings within the existing firmware of the unit.

The system in constant communication with the vehicle or motorcycle even in the event of a malfunction.

Easy to install in a vehicle or motorcycle, it is compact in size and includes built in antennas.

Saves time and cost because of the possibility to define different frequencies of transmission according to the local broadcast or Roaming.

Its open system and its platform allow integration of every situation, both simple and complicated.

Confidence that in the event of an unusual situation the system will automatically be activated.

Example, at the time of an accident the system will automatically unlock the doors and beep every pre-set amount of minutes to identify the location of the car or motorcycle.

It provides solutions to virtually every conceivable requirement.

Programmable Events: Events can be defined to both transmit and act on complex events. For example – activating the horn and transmitting when a tanker truck activates its engine while unloading fuel at the fuel depot
Speed restrictions: Programmable alerts whenever the vehicle goes above/ below a pre-defined speed, to detect over hastiness and unauthorised stops
Mileage: Ability to alert every specific number of kilometres / miles
Curve detection: Support for transmitting at every turn, for better route visualisation
Motor is running while stationary: Alert when the motor is running and the vehicle is left stationary
at a specified time range
Perimeter based alerts: Geo-fencing alerts when a vehicle is entering/ leaving a specified area at a

specified time. Fuel Measuring: reduce your fuel costs by monitoring and measuring your driver usage of fuel. Connect your unit directly to the vehicle’s fuel gauge or to an external accessory for measuring fuel level. This connection will enable you to compare fuel consumption with distance travelled, minimising the risk of fuel theft or excessive consumption
Values Monitoring: Monitoring of analogue inputs to alert when voltage/ temperature is exceeding.
Driver Identification: By using different Dallas iButton, Remote Controls, Keypad or RF Keypad
Codes, the unit sends the code of the current vehicle driver to the centre
Mileage Transmissions: Periodic mileage transmissions for the needed vehicle’s maintenance
Automated Tracking: Automatic support for vehicle tracking at specified times without sending additional commands to the vehicle

Digital Inputs: Advanced Plus: Eight digital inputs, usually used for Ignition, Emergency, Doors, Arming, and Disarming TT: Two digital inputs
1 Pulse Counter Input: To measure odometer pulses, or any sort of pulses generated by external
devices
Analogue Inputs: Advanced Plus: Three analogue inputs, each can be set to work in two different measurement scales. Example: usages are external temperature sensors or fuel measurement without a need for external sensor / TT: One analogue input is optional (one digital input can be used as an analogue input)
Inputs programming: Each input can be programmed to be used in order to trigger transmissions under any condition and to arm or disarm the security system.
Main power indication: A main power measurement to indicate the vehicle’s battery voltage
Canbus connection: Direct connection to the vehicle’s computer using the CANBus protocol

OBD-II support: Using two wires, a direct connection to the vehicle’s on-board diagnostics is available and can be used to retrieve various parameters including fuel level, speed, mileage and RPM
Odometer Support: Support for digital odometer to read its pulses and calculate the vehicle’s
mileage
Digital Outputs: Advanced Plus: Digital outputs, usually used for Lock, Unlock, Siren, and Immobiliser / TT: One digital output
Pulses Width Modification: Ability to set the width and number of the lock and unlock pulses

Emergency Button: Support for emergency button to invoke an immediate high-priority transmission to the centre
Accident and Harsh Braking Detector: Built-in accelerometer serves as both accident and a harsh braking detector

Auto Lock: Support for locking/unlocking the doors whenever the motor is starting/stopping

GPS Receiver: Built in GPS receiver allows real-time tracking and on-board location-based analysis
Mileage by GPS: Advanced algorithm to calculate the vehicle’s mileage based on the GPS, without the need for any external connections to the vehicle’s odometer

Last Location Saving: Saving of the vehicle’s last position, in case of going out of GPS coverage

Cellular Connectivity: Support for GSM networks (GPRS or optional 3G), while using both the
SMS channel and the data channel. Supported bands are 850/900/1800/1900 MHz Optional support for CDMA, HSDPA networks
Satellite Connectivity: Using an external device, an Iridium connection may be used when out of cellular coverage
TCP Connectivity: Support for the GPRS/1x TCP/IP networks by either staying online at all times, or coming online when a transmission is initiated
DNS Support: Connection to a server by its host name
Backup Server: Backup host name support in case of the main server going offline
Encryption: Protocol encryption to provide maximum security between the vehicle and the centre

External Protocol Support: Support for external devices for 3rd party protocols, such as text terminal or RFID readers
Navigation Support: Support for external devices for navigation, such as handheld or laptop computers
Anti-jamming: Support for a gradual stop of the vehicle if a theft transmission has failed due to communication frequencies jamming
Compact Protocol: Less than 70 bytes per message enables very small bandwidth usage and saved communication costs
Voice Calls: Hands-free kit to support voice call from and to the vehicle. Ability to initiate a voice call from the unit without the knowledge of the driver

Firmware Upgrade: Over the air firmware upgrade to apply new features to already-installed units
Status Requests: Ability to request the latest status of the vehicle, and receive the entire information about all the inputs, outputs, and location information
Tracking: Option to remotely set periodic transmissions from the unit in intervals between 10 seconds to 5 days
Tracking Interval by Channel: Different transmissions intervals can be set to each communication channel used –SMS/GPRS/Roaming
Parameters Programming: Complete programming of each and every one of the unit’s parameters over the air
Remote Arm/Disarm: Option to arm or disarm the vehicle from the centre

Output State Changing: Option to remotely activate/ deactivate different outputs, such as locking/unlocking the doors, starting/ stopping the siren, activating/ deactivating the immobiliser
Learn Dallas/Remote Control: Remote activation of extra Dallas iButton and Remote Control
Mileage setting: Remote update to synchronise the unit and the vehicle internal mileage counter
Voice Call Request: Request the unit to call a specific number for a voice call to communicate with the driver and/or hear the activity inside the vehicle
Text Messaging: Send a text message to the vehicle’s text terminal.

Garage Mode: Special condition in which the alarm system is turned off and no emergency transmissions are sent. This condition is time-limited
Internal Logging: Whenever a transmission has failed to be sent, the entire message is saved to the memory for later transmission. 15 thousand complete messages, including statuses, can be recorded this way
Low Power Mode: Option to switch to a low power mode (up to 3mA) whenever the alarm system is armed, best used for motorcycles

Fully Certified: Fully certified and complies with the highest standards of the automotive industry
Waterproof (IP65): A silicon case that gives maximum protection from water and extreme weather conditions is available (TT only)

Complete Security System: Complete operational security system with different logic states to detect break-ins and report to the centre
Times Programming: Complete control over the alarm system timing (the intervals at which the unit stays at each of the alarm system logic modes)
Wakeup from accelerometer: The unit can wake up from an event triggered by the accelerometer
Towing Detection: GPS-based detection of movement while the system is armed, produces a towing alert to the centre. TT can also detect a tow alert by recording the cellular antennas in its
vicinity

Low Power Warning: Warning transmission whenever the vehicle’s main power goes below a predefined threshold
4 Disarming Devices: Four disarming devices are available, including keypad and RF Keypad, remote control, and Dallas iButton
Gradual Stop: Option to gradually stop the vehicle by sending pulses to the immobiliser or fuel pump

Do you need any assistance? CONTACT OUR TEAM