CLOSE SEARCH

Analogue Addressable Fire Detection

Analogue Addressable Fire Alarm Detection Systems differ from conventional systems in a number of ways and add more flexibility, intelligence, speed of fire identification and precise location, scope of control and additionally ease of installation and modification to existing systems.

For these reasons Analogue Addressable Fire Alarm Systems are the natural choice for larger premises and more complex system requirements.

In an analogue addressable system detectors, call points, sounders and other devices etc are wired in a loop around the building with each device having its own unique ‘address’.  The system may contain one or more loops depending upon the size of the system and design requirements.

The Fire Control Panel carries out a constant polling routine in which each device is interrogated in a programmed sequence. Each Detector responds with a status report ‘Healthy’, ‘Pre-Alarm’ ‘In Alarm’ or ‘In Fault’. Detector alarm or fault conditions are displayed on the panel indicating the precise location of any detector.

Analogue Addressable

Analogue Addressable systems can give advance warning of a developing hazard and pinpoint the individual device raising the alarm. It is possible to follow the spread or progress of a fire as individual detectors report conditions in their area and this could allow a phased evacuation and precise direction of fire-fighting teams.

Alarm indication devices such as Sounders and Strobes are also wired on the loop, each with their own unique address, they are individually programmed at the fire control panel to activate on certain conditions ‘cause and effect’ i.e. local fire detectors in fire condition or detectors on floors below or adjacent in alarm condition etc.

Intrinsically Safe Analogue Addressable system devices are available for installation in hazardous areas defined by BS EN 600079. Such as where an explosive mixture of air and gas or vapour is, or may be present continuously, intermittently or as a result of an accident.

The XP95 Range

XP95 Intelligent Flameproof Dual IR Detector

Price On Enquiry

The XP95 Intelligent XP95 Intelligent Flameproof Dual IR Detector is designed for use in areas where flaming fires may be expected. The detector has two sensors which respond to different IR wavelengths to discriminate between flames and spurious sources of radiation. Applications include aircraft hangars, coal handling and paper manufacturing plants and woodworking environments.

VIEW DETAILS

XP95 Intelligent Dual IR Flame Detector

Price On Enquiry

The XP95 Intelligent Dual IR Flame Detector is designed for use in areas where flaming fires may be expected. The detector has two sensors which respond to different IR wavelengths to discriminate between flames and spurious sources of radiation. Applications include aircraft hangars, coal handling and paper manufacturing plants and woodworking environments.

VIEW DETAILS

XP95 Duct Probe

Price On Enquiry

The XP95 Duct Probe enables smoke detectors to be sited within ventilation extract ducts in order to assist in the prevention of the spread of smoke.

VIEW DETAILS

XP95 IS Galvanic Barrier

Price On Enquiry

The XP95 Intrinsically Safe Galvanic barrier can be installed in safe areas and ensures system integrity.

VIEW DETAILS

XP95 IS Protocol Translator

Price On Enquiry

The XP95 Intrinsically Safe Protocol Translator is installed in the safe area ensuring integrity of communication between control equipment and field devices and safety within the limits of BASEEFA approvals.

VIEW DETAILS

XP95 IS Manual Call Point - MEDC Style

Price On Enquiry

The XP95 Intrinsically Safe Manual Call Point Red, without flap - MEDC Style is recommended for heavy duty applications.

VIEW DETAILS

XP95 IS Manual Call Point - Standard Type

Price On Enquiry

The XP95 Intrinsically Safe Manual Call Point is based on the standard waterproof model, without flap, Red.

VIEW DETAILS

XP95 IS Mounting Base

Price On Enquiry

The XP95 Intrinsically Safe Mounting Base has been designed to accept only IS products, this ensures that standard detectors cannot inadvertently be fitted into an Intrinsically Safe system

VIEW DETAILS

XP95 IS Ionisation Smoke Detector

Price On Enquiry

The XP95 Intrinsically Safe Ionisation Smoke Detector uses a low activity radioactive foil to detect fires by irradiating the air in the smoke chambers and causing a current flow. If smoke enters the chamber, the current flow is reduced leading to an alarm.

VIEW DETAILS

XP95 IS Heat Detector

Price On Enquiry

The XP95 Intrinsically Safe Heat Detector operates by measuring heat levels with a single thermistor network which gives a count output proportional to the external air temperature.

VIEW DETAILS

XP95 IS Optical Smoke Detector

Price On Enquiry

The XP95 Intrinsically Safe Optical Smoke Detector works using the light scatter principle and is ideal for applications where slow-burning or smouldering fires are likely.

VIEW DETAILS

XP95 Mains Switching Input / Output Unit

Price On Enquiry

The XP95 Mains Switching Input / Output Unit provides a voltage-free, single pole change-over relay output and a monitored switch input.

VIEW DETAILS

XP95 Switch Monitor with Isolator

Price On Enquiry

The XP95 Switch Monitor with Isolator is designed to monitor the state of one or more single pole, volt-free contacts connected on a single pair of cables and to report the status to Apollo compatible analogue control equipment.

VIEW DETAILS

XP95 Sounder Control Unit with Isolator

Price On Enquiry

The XP95 Sounder Control Unit with Isolator is used to control the operation of a zone of conventional sounders and report their status to the control panel.

VIEW DETAILS

XP95 Output Unit with Isolator

Price On Enquiry

The XP95 Output Unit with Isolator provides a voltage free single pole, changeover relay output. It is a simplified version of the Input/Output Unit without circuitry for monitoring inputs. Capable of switching up to 30V at 1A

VIEW DETAILS

XP95 Three Channel Input / Output Unit

Price On Enquiry

The XP95 Three Channel Input / Output Unit provides three voltage-free, single pole, changeover relay outputs and three monitored switch inputs.

VIEW DETAILS

XP95 Input / Output Unit with Isolator

Price On Enquiry

The XP95 Input / Output Unit with Isolator provides a voltage-free, double pole changeover (DPCO) relay output, a single monitored switch input and an unmonitored, non-polarised opto-coupled input.

VIEW DETAILS

XP95 Loop-Powered Red Visual Indicator

Price On Enquiry

The XP95 Loop-Powered Red Visual Indicator is a local-area visual indicator designed for indoor use. The Visual Indicator has been developed as a supplement to sounders for use in situations where there is a risk that sounders will not be heard.

VIEW DETAILS

XP95 Weatherproof Multi-Tone Open-Area Sounder Red Visual Indicator with Isolator

Price On Enquiry

XP95 Weatherproof Multi-Tone Open-Area Sounder Red Visual Indicator is designed for use in outdoor open areas and can be connected to any Discovery or XP95 system. The sounder red visual indicator complements the intelligent and integrated base sounders as well as the Multi-Tone Open-Area Sounder.

VIEW DETAILS

XP95 Multi-Tone Open-Area Sounder Red Visual Indicator

Price On Enquiry

The XP95 Multi-Tone Open-Area Sounder  Red Visual Indicator is designed for use in indoor open areas and can be connected to any Discovery or XP95 system. The sounder visual indicator complements the intelligent and integrated base sounders as well as the Multi-Tone Open-Area Sounder.

VIEW DETAILS

XP95 Intelligent Open-Area Clear Visual Indicator

Price On Enquiry

XP95 Intelligent Open-Area Clear Visual Indicator is for use in situations where there is a risk that sounders will not be heard.

VIEW DETAILS

XP95 Intelligent Open-Area Red Visual Indicator

Price On Enquiry

XP95 Intelligent Open-Area Red Visual Indicator is for use in situations where there is a risk that sounders will not be heard.

VIEW DETAILS

XP95 Red Cap

Price On Enquiry

The XP95 Red Cap is used when a detector is not fitted to the XP95 Sounder and Sounder Beacon Bases, making it a stand alone unit.

VIEW DETAILS

XP95 White Cap

Price On Enquiry

The XP95 White Cap is used when a detector is not fitted to the XP95 Sounder and Sounder Beacon Bases, making it a stand alone unit.

VIEW DETAILS

XP95 Sounder Visual Indicator Base with Isolator

Price On Enquiry

XP95 Sounder Visual Indicator Base with Isolator is a loop-powered sounder, visual indicator and isolator combined with a standard intelligent mounting base. It is used to signal a fire alarm in enclosed areas. The Isolator senses and detects short-circuit faults on loops and spurs.

VIEW DETAILS

XP95 Sounder Visual Indicator Base

Price On Enquiry

XP95 Sounder Visual Indicator Base is a loop-powered sounder and visual indicator combined with a standard Intelligent Mounting Base. It is used to signal a fire alarm in enclosed areas.

VIEW DETAILS

XP95 XPert Card Pre-Addressed

Price On Enquiry

Pre-Addressed XPERT Cards are supplied with pips already removed. Saves time and increases accuracy during commissioning Uses patented, proven technology Address remains the same, no matter how often the detectors are replaced Complete set (1-126)

VIEW DETAILS

XP95 XPert Card

Price On Enquiry

A universal address card supplied with all bases, using a coding guide, pips are removed to set the address of the inserted detector. Simplifies and speeds up installation and commissioning Uses patented proven technology Address remains the same, no matter how often detectors are replaced Flexibility to create any address

VIEW DETAILS

XP95 Manual Call Point with Isolator

Price On Enquiry

The XP95 Manual Call Point with Isolator has a highly visible alarm indicator which can be seen from up to 10 metres away. The Isolating Base senses and detects short-circuit faults on loops and spurs. When activated, the manual call point interrupts the polling cycle for a fast response. A combined LED indicator and front reset mechanism allows for a quick and simple reset.

VIEW DETAILS

XP95 Manual Call Point

Price On Enquiry

The XP95 Manual Call Point has a highly visible alarm indicator which can be seen from up to 10 metres away. When activated, the manual call point interrupts the polling cycle for a fast response. A combined LED indicator and front reset mechanism allows for a quick and simple reset.

VIEW DETAILS

XP95 Isolator

Price On Enquiry

The XP95 Isolator senses and detects short-circuit faults on loops and spurs. Requires Isolator Base 45681-211

VIEW DETAILS

XP95 Isolator Base

Price On Enquiry

The XP95 Isolating Base senses and detects short-circuit faults on loops and spurs. The Isolator Base is unique and designed to only accept the Isolator 55000-720

VIEW DETAILS

XP95 Isolating Base

Price On Enquiry

All detectors in the XP95 range fit this Isolating Base, low insertion force is required to insert the detector. The Isolating Base senses and detects short-circuit faults on loops and spurs. An  XPERT card is supplied with the base,  the XPERT card address is held in the base keeping it entirely free from electronic parts of the detector.  

VIEW DETAILS

XP95 Low Power Detector Mounting Base

Price On Enquiry

All detectors in the XP95 range fit this Low Power Detector Mounting Base, low insertion force is required to insert the detector. The Base incorporates a low power relay to control field equipment. An  XPERT card is supplied with the base, the XPERT card address is held in the base keeping it entirely free from electronic parts of the detector.  

VIEW DETAILS

XP95 Deep Detector Mounting Base

Price On Enquiry

All detectors in the XP95 range fit this Deep Detector Mounting Base, low insertion force is required to insert the detector. This has an increased depth allowing for cables to be inserted from the side. An  XPERT card is supplied with the base,  the XPERT card address is held in the base keeping it entirely free from electronic parts of the detector.  

VIEW DETAILS

XP95 Heated Detector Mounting Base

Price On Enquiry

All detectors in the XP95 range fit this Detector Mounting Base, low insertion force is required to insert the detector. The Heated Detector Base is designed to be used in cold climates where environmental conditions could result in either icing or condensation affecting the operation of detectors. An  XPERT card is supplied with the base, the XPERT card address is held in the base keeping it entirely free from electronic parts of the detector.    

VIEW DETAILS

XP95 Detector Mounting Base

Price On Enquiry

All detectors in the XP95 range fit this Detector Mounting Base, low insertion force is required to insert the detector. An  XPERT card is supplied with the base,  the XPERT card address is held in the base keeping it entirely free from electronic parts of the detector.  

VIEW DETAILS

XP95 Ionisation Smoke Detector

Price On Enquiry

The XP95 Ionisation Smoke Detector uses a low activity radioactive foil to detect fires by irradiating the air in the smoke chambers causing a current flow. If smoke enters the chamber, the current flow is reduced leading to an alarm. Responds well to fast-burning, flaming fires Designed to operate in a variety of environments Minimal effects from the temperature, humidity, atmospheric pressure Protected against electromagnetic interference over a wide frequency range

VIEW DETAILS

XP95 Heat Detector CS

Price On Enquiry

The XP95 Heat Detector monitors temperature by using a single thermistor which provides a count output proportional to the external air temperature. This high temperature detector is classified as a CS device and will report an alarm at 90°C. Ideal in environments that are dirty or smoky under natural conditions Well suited for warehouses, loading bays and carparks Unaffected by wind or atmospheric pressure

VIEW DETAILS

XP95 Heat Detector A2S

Price On Enquiry

The XP95 Heat Detector monitors temperature by using a single thermistor which provides a count output proportional to the external air temperature. This standard heat detector is classified as an A2S device and will report an alarm at 55°C. Ideal in environments that are dirty or smoky under natural conditions Well suited for warehouses, loading bays and carparks Unaffected by wind or atmospheric pressure

VIEW DETAILS

XP95 Multisensor Detector

Price On Enquiry

The XP95 Multisensor Detector contains an optical smoke sensor and a thermistor temperature sensor whose outputs are combined to give the final analogue value. Sensitive to a wide range of fires Well suited for environments such as hotel bedrooms Unaffected by wind or atmospheric pressure

VIEW DETAILS

XP95 Optical Smoke Detector

Price On Enquiry

The XP95 Optical Smoke Detector works using the light scatter principle and is ideal for applications where slow-burning or smouldering fires are likely. Responds well to slow-burning, smouldering fires Well suited for bedrooms and escape routes Unaffected by the wind or atmospheric pressure

VIEW DETAILS

Minidisc Remote Indicator

Price On Enquiry

The Minidisc remote indicator is a compact indicator for use in fire protection systems. Compatible with Series 65, Alarmsense, Orbis, XPlorer, XP95 & Discover Fire Detection Systems.

VIEW DETAILS

 

Do you need any assistance? CONTACT OUR TEAM

Aviation & Airport Security

  • Security screening operations
  • Access & Entry Control
  • X-Ray Scanning
  • Perimeter Security
LEARN MORE